I need to replace my chain. What size / type do I need?
We'd recommend a KMC 9-speed chain - these normally come as 114 links but it will need to be shortened to 100 links. This is pretty easy to do if you've got the tool, or any bike shop will be able to do this for you. We're also happy to do it at our workshop if you wanted to order the chain to us and then we can post the shortened one to you.
Related Articles
How to lubricate the chain
It is a good idea to clean and re-lubricate your bike regularly. We recommend you re-lubricate the chain regularly for smooth pedalling. First remove the old lubricant with degreaser, by carefully turning the pedals backwards and spraying at the ...
Which inner tubes do I need if I need to buy a replacement?
We recommend Schwalbe AV4 - 16/18 x 1 3/8 inch - Schrader valve. You can find these at most bike retailers. The tyre measurements for the FLIT-16 are 35-349 ETRO or 16" x 1.35". NB: the inner tubes must have a Schrader valve, not a Presta valve. ...
My chain has come off, how do I put it back on?
HOW TO TAKE THE CHAIN OFF To remove the chain, the easiest way to do it is to push the chain tensioner arm up, remove the chain from the chain tensioner arm jockey wheel (#04 in the diagram below). The chain tensioner arm will spring backwards, ...
What type of replacement brake pads should I buy for the FLIT-16?
Front brakes For the front brakes you’ll need v-brake pads. The direct replacement is Tektro 520.12 55mm which you can find in most stores. Most other manufacturers will work too though, as long as it’s a v-brake pad of similar length. Rear brakes ...
Is the FLIT-16 compatible with a larger chain-ring?
The FLIT-16 comes with a single speed set up (38T to 9T) as standard. The FLIT-16 is also compatible with 40T or 42T chainrings. If you would like your bike to be shipped with a bigger chainring for higher gearing, contact us at hi@flit.bike when ...