Who makes the rear hub motor?
The motor used on the FLIT-16 is manufactured by Bafang.
The motor used in the M2 is made by MiVice. We chose MiVice for the M2 as they have a good reputation within the ebike industry, the high quality and the natural feeling ride that the motor gives.
We chose to move away from Bafang as we have found that MiVice have proved much more reliable in testing and development of the M2.
Related Articles
Why is a rear hub motor better than a front hub motor?
We have chosen a 220W rear hub motor as we find that it gives much better acceleration than larger 250W front hub motors. This is because we can use maximum motor torque without worrying about wheel slip. To explain more, folding bikes tend to have ...
How does the motor work?
The bike senses how hard you are pedalling, and then amplifies your pedalling effort with power from the rear hub motor. Placing the motor in the rear wheel allows for greater acceleration and a natural feeling ride. It’s a 220W rear hub motor, ...
How to remove and re-install the rear wheel
TOOLS NEEDED Something soft for the floor, to rest your bike onto Wire cutters or pliers Either a 15mm deep socket, 15mm pedal spanner OR an adjustable spanner REMOVAL INSTRUCTIONS First, remove the chain. The easiest way is to push the chain ...
How to install front and rear mudguards
TOOLS NEEDED 4mm allen key 10mm socket or spanner DIAGRAM INSTRUCTIONS - Please find attached to this article FRONT MUDGUARD INSTALLATION Place a 4mm allen key into the screw holding the front light, and a 10mm socket or spanner onto the dome nut on ...
What motors do FLIT bikes use?
The M2 has a powerful 250Wh rear hub motor, located in the rear wheel. The motor and electrical system is manufactured by MiVice. We chose MiVice for their good reputation within the ebike industry, and the high quality, natural feeling ride that the ...