Servicing & maintenance
Which inner tubes do I need if I need to buy a replacement?
We recommend Schwalbe AV4 - 16/18 x 1 3/8 inch - Schrader valve. You can find these at most bike retailers. The tyre measurements for the FLIT-16 and the M2 are 35-349 ETRO or 16" x 1.35". NB: the inner tubes must have a Schrader valve, not a Presta ...
What type of replacement brake pads should I buy for my FLIT bike?
Front brakes - FLIT-16 For the front brakes you’ll need v-brake pads. The direct replacement is Tektro 520.12 55mm which you can find in most stores. Most other manufacturers will work too though, as long as it’s a v-brake pad of similar length. Rear ...
I need to replace my chain. What size / type do I need?
We'd recommend a KMC 9-speed chain - these normally come as 114 links but it will need to be shortened to 100 links. This is pretty easy to do if you've got the tool, or any bike shop will be able to do this for you. ? Please be aware that if you ...
How to maximise the life of your battery
To maximise the lifespan of the battery avoid heat; – charge cool: charge at a temperature between 5 and 45°C (ideally <25°C). – store cool: for long term storage, the cooler the better but don’t store below freezing. Use top-up charges to keep ...
How to remove and re-install the rear wheel
TOOLS NEEDED Something soft for the floor, to rest your bike onto Wire cutters or pliers Either a 15mm deep socket, 15mm pedal spanner OR an adjustable spanner REMOVAL INSTRUCTIONS First, remove the chain. The easiest way is to push the chain ...
How to remove and re-install the front wheel
TOOLS NEEDED Something soft for the floor to rest your bike onto 4mm allen key REMOVAL INSTRUCTIONS First, disconnect the brakes. To do this simply squeeze the arms together, hold the silver piece and push the small black part down gently to release ...
How to look after your FLIT-16 battery
ABOUT THE BATTERY Battery capacity is measured in Watt-Hours. The FLIT-16 comes with a 230 Wh battery that should have a suitable capacity to last for 20 – 30 miles for most riders on most journeys. The battery can be locked in the bike by fixing the ...
What tyres are compatible with the FLIT-16?
The FLIT-16 comes with Schwalbe Marathons as standard. We have chosen this tyre for its durability and excellent puncture resistance. The rims on the FLIT-16 are 16″ 349 ETRTO so most tyres made for this rim type will fit. Some of the very wide tyres ...
How do I get a replacement battery?
Replacement batteries can be purchased directly from us via our Accessories page. We are also committed to recycling batteries sustainably – you can recycle yours by sending it back to us. Please get in touch to find out more.
Where can I get spare or replacement parts for my FLIT bike?
Standard parts for your bike can be supplied by most bike shops. These parts include tyres, brake pads and discs, chain rings, chain, grips, pedals etc. Parts that are unique to FLIT bikes are the rear sprocket, crank arms, chain tensioner, retaining ...
How to pump the tyres
The valve used on the FLIT-16 is a Schrader valve. You will need a Schrader-compatible pump to inflate the tyres. Check the air pressure is within the bounds of the limits on the tyre side-wall. The tyres the bike is supplied with are 4.5 – 7.5 bar ...
How to lubricate the chain
It is a good idea to clean and re-lubricate your bike regularly. We recommend you re-lubricate the chain regularly for smooth pedalling. First remove the old lubricant with degreaser, by carefully turning the pedals backwards and spraying at the ...
How to clean your FLIT-16
To clean your ebike, use a bucket of water and a sponge to gently wash the dirt off. Remove the battery before cleaning the bike or performing any other maintenance. Please follow the video above for a step by step guide on how to do so. Do not use a ...