My FLIT-16 is showing an 'Error 08' code on the display, how do I fix this?

My FLIT-16 is showing an 'Error 08' code on the display, how do I fix this?



WHAT DOES ERROR 08 MEAN?


If your display is showing an “Error 08” code on the display, this means that there is a motor connection issue. This is most likely caused by a loose connection.


HOW TO FIX

To fix this, check both motor connections as per the video above.

First, check the connector that lies underneath the motor. You should see two arrows, one on each part. Push these together, then check the display to see if the Error 08 message has disappeared.

If the Error 08 message is still showing, the next thing to check is the connector underneath the top tube. You’ll find it about two thirds of the way along the cable braiding, where there is a defined lump in the cable. Again, push both parts together, then check the display. Hopefully the message has now disappeared.


ERROR 08 STILL SHOWING


If you have tried both connections without success, contact us at support@flit.bike so that we can fix this for you.


    • Related Articles

    • My display is showing an error code, what should I do?

      Lookup the error code in your display manual (attached). If you can't find the error code, contact us for help. ​ If the display error code is one which requires using the BESST tool, please contact us, as this repair job will need to be done by a ...

    • How to use the display

      PARTS OF THE DISPLAY   TURNING THE EBIKE ON To use your ebike, first turn it on by holding down the power button which is located on the handlebar display.  If the display does not turn on after pressing the power button, your battery may have gone ...

    • How to unbox your FLIT-16

      Unboxing First, carefully open the box using a pen knife or scissors. Try not to damage it as you may need it for the future. Take out any accessories on the top layer of the box, then remove your seat post, manual and folding instructions, charging ...

    • How to charge your FLIT-16

      CHARGING THE BATTERY WHILST IT’S INSIDE THE BIKE ​ To charge your FLIT-16, first assemble the charging cable by attaching the charging lead to the black transformer box. Then open the charging port on the left-hand side of the bike, and insert the ...

    • Where can I get spare or replacement parts for my FLIT-16?

      You can order any spare or replacement parts directly through us – all you need to do is get in touch and we can help you out. We will keep a stock of any FLIT proprietary parts in the UK ready to be shipped if necessary to you. You can then take ...