Press and hold the plus (+) button on your display for three seconds.
To turn the off again, repeat the process above.
The lights by default are automatic. The display has a light sensor that will sense when you are in darkness, and automatically turn the lights on. To override the automatic lights, simply press and hold the plus (+) button.
If you’d like the lights to be manually operated all the time, you can adjust the automatic light settings as described in this article.
If you’d rather manually operate your integrated lights, follow these instructions. You can also adjust the sensitivity if you’d like to keep them automatic, but find that they are turning on too frequently. First, turn your ebike on. Press and hold ...
To turn your ebike on, press and hold the power button for three seconds. The display will light up as soon as the bike has powered on. To turn it off again, repeat the above. If the display does not turn on after pressing the power button, your ...
To tighten the clamp handles, you should tighten as far as you can with one finger, then add a quarter turn with two. This prevents the clamp being over-tightened, which can cause damage. If you notice that the clamp handles feel more difficult to ...
No power from motor, display still on This is likely to be a loose torque sensor connection. The torque sensor is what senses your pedalling effort, so if there is a loose connection you won't feel the boost from the motor. To check the torque sensor ...
PARTS OF THE DISPLAY TURNING THE EBIKE ON To use your ebike, first turn it on by holding down the power button which is located on the handlebar display. If the display does not turn on after pressing the power button, your battery may have gone ...