How to fit the Klickfix Handlebar Adapter

How to fit the Klickfix Handlebar Adapter



FITTING THE ADAPTER


The Klickfix adapter can be fitted onto the handlebar stem, or steerer tube – depending on which position you’d like your bag to be in. Klickfix instructions on how to fit the adapter can also be found here.


TOOLS REQUIRED:


1 x Philips screwdriver

First, insert the two rubber stickers on the inside facing side of both parts of the adapter. These protect the paintwork on your bike.

Then, place the locking mechanism on the front of your bike, just underneath the handlebar clamp. The red button on the mechanism should be facing upwards. Position the mounting bracket on the opposite side, then thread the screws through.

Tighten the screws with a screwdriver to secure the mount.


USING THE ADAPTER

You can use the Klickfix adapter with any handlebar accessories that have a Klickfix compatible plate. To use, simply line up your bag with the adapter and push to click it into place. To release the bag, press the read button.

Please note that the maximum load is 7kg.


    • Related Articles

    • Are different handlebar displays available with the FLIT-16?

      At the moment we offer one handlebar display. We have chosen this display for its large screen and ease-of-use.

    • How to adjust the handlebar height on a FLIT-16

      Tools you'll need 6mm allen key Instructions Place the end of the allen key into the bolt on the handlebar clamp, and turn anti-clockwise to loosen it. Once the clamp is loosened, move towards the front of the bike and wedge the front wheel between ...

    • Will the FLIT bike fit me?

      The FLIT-16 and the FLIT M2 can comfortably fit riders from 4ft 6" (with the standard seat post), to 6ft 6" tall (with the extended seat post). We recommend that riders over 6ft tall use the extended seat post. The FLIT-16 and M2 has been designed so ...

    • How to fit your Foldylock Compact bike lock

      HOW TO FIT YOUR FOLDYLOCK: First, remove the lock from the holder. Undo the velcro straps, then place the holder between the arms connecting the front of the bike to the top tube, as shown in the video above. Thread the velcro straps to secure the ...

    • How to fit the Frost + Sekers Quicklock Saddle Mount

      TOOLS YOU’LL NEED 4mm Allen key INSTRUCTIONS First, undo the seat post quick release and remove the seat post from your bike. Place the saddle upside down on a table so that you can easily access the bolts on the saddle rails. Undo both bolts using a ...